Characterization of the Chemical Composition of Chinese Moringa oleifera Seed Oil

This work focused on physicochemical property assaying, fatty acid composition, triacylglycerol (TAG) profiles, and unsaponifiable matter composition of the Chinese Moringa oleifera seed oil. The results indicated that there was no significant difference in approximate nutritional components between M. oleifera seeds from China and India, while variations in the mineral element contents are significant. Both the Soxhlet extraction method and the aqueous enzymatic extraction method were adopted to extract oil from Chinese M. oleifera seeds. Oil yield obtained using the Soxhlet extraction method was higher than that obtained using the aqueous enzymatic extraction method. While both the iodine value and unsaponifiable matter content of the aqueous enzymatic extracted oil were a little higher than that of the Soxhlet extracted oil. Both oils possess a very low acid value and peroxide value, suggesting their good quality as edible oil. Fatty acid composition results indicated that this oil was especially high in oleic acid. Characterization of the TAG composition was achieved by a two-dimensional high-performance liquid chromatography (HPLC) coupling of nonaqueous reverse-phase and silver ion HPLC with the atmospheric pressure chemical ionization mass spectrometry method. A total of 22 TAG including 16 regioisomers were determined. Composition results of unsaponifiable matters revealed that this oil possesses a number of phytosterols, in which β-sitosterol and stigmasterol are most predominant.     

Crude Oil Production

Current data on crude oil, field/lease condensate, and natural gas liquids produced from NGL plants. Updated on a monthly basis.     

Hydrotreatment of jatropha oil over noble metal catalysts

Jatropha oil is a promising nonedible feedstock for producing renewable diesel. In this work, the hydrotreatment processing of jatropha oil was investigated. Instead of using conventional alumina-supported Co–Mo, Ni–Mo, and Ni–W catalysts that need sulfidation pretreatment, noble metals such as Pd and Ru were chosen. Trials were performed in an isothermal trickle-bed reactor and the reaction conditions were as follows: temperature 603–663?K, weight hourly space velocity (WHSV) 1 to 4/h, pressure 1.5–3?MPa, and H₂/oil ratio 200–800 (v/v). Yield of n-C₁₅ to n-C₁₈ hydrocarbons was maximized (70.3 and 43.8% for Pd/Al₂O₃ and Ru/Al₂O₃, respectively) at the following conditions: T?=?663 K, WHSV?=?2/h, P?=?3?MPa, and H₂/oil ratio?=?600 (v/v). Since Ru favored cracking reactions to a larger extent than Pd, the yield of C₁₅ to C₁₈ hydrocarbons over Ru/Al₂O₃ was lowered. Using simple first-order plots for oil conversion, activation energies for the hydrotreating process over Pd/Al₂O₃ and Ru/Al₂O₃ were found and they were equal to 109 and 121?kJ/mol, correspondingly.     

渤海海域莱州湾凹陷高硫稠油成因及其成藏模式

现今渤海海域仅在莱州湾凹陷发现了规模型高硫油油田，其原油性质复杂，来源及成因认识不清。在大量实验数据分析的基础之上，利用地球化学分析方法和盆地模拟手段对莱州湾凹陷各油田油气来源及成因做了详细研究，结果表明：①莱州湾凹陷主要发育了沙三段和沙四段两套有效的烃源岩，陡坡带和中央构造带上各构造原油主要来源于主洼沙四段烃源岩，缓坡带上各构造原油表现为主洼沙四段和南次洼沙四段双洼供烃的特征；②沙四段地层沉积时期存在水体分隔，南次洼水体更加咸化易形成富硫干酪根，其烃源岩分布范围控制着高硫油的分布范围，是高硫油形成的主控因素。而生物降解作用，一方面导致原油稠化是形成稠油的主要原因，另一方面使原油硫含量相对富集，是形成高硫油的重要因素；③垦利16-1油田具有晚期成藏的特点，形成了咸化湖盆早生、早排双洼供烃成藏模式，深、浅地层成藏模式不同，深部地层为典型不整合面侧向输导远源成藏模式。认为南次洼南部古近系地层和潜山优质储层是油气聚集的有利区带，可作为下一步油气勘探的有利方向。     

汽车冷轧钢成形极限曲线测定方法探讨

基于国家标准《GB/T15825.8-2008金属薄板成形性能与试验方法》，开展成形极限曲线试验。试验发现，采用哑铃形的试样可提高试验成功率；成形极限曲线右边部分不完整的问题可通过降低试样和球形冲头之间摩擦力、优化试样宽度变化范围以及增加试样宽度规格得到改善；此外，提出基于软件的寻找缩颈点可行方案。     

歧口凹陷歧北次凹沙河街组三段页岩油地质特征与勘探突破

歧口凹陷歧北次凹沙河街组三段（沙三段）湖泛期细粒沉积发育、烃源岩品质好、页岩油资源丰富，但其研究尚处于起步阶段，在沧东凹陷孔店组二段湖相页岩油工业化开发的带动下，落实其勘探前景势成必然。为探究歧北次凹沙三段页岩油的地质特征及勘探潜力，依据F39X1井、QY10-1-1井等多口井的岩心、分析化验、测井资料和录井资料，对沙三段页岩层系的地质特征、页岩油类型与富集模式、甜点的空间分布规律等开展了综合研究。歧北次凹沙三段的矿物组成和岩石类型多样，主要包括灰质白云质页岩、长英质页岩、混合质页岩及微晶白云岩、亮晶生屑白云岩、粉砂岩等；烃源岩的总有机碳（TOC）含量主要分布在1%~3%，以Ⅱ型干酪根为主且指示热演化成熟度的镜质体反射率（R_o）普遍高于0.7%；储集空间主要包括粒间孔、晶间孔、生物体腔孔、有机孔及层理缝、构造（微）缝等；页岩油的超越效应明显（油饱和度指数平均为116.3 mg/g）、荧光显示良好。在歧北次凹沙三段中识别出单一型和夹层型2类页岩油，构建了高TOC滞留型页岩油和低TOC运移型页岩油2种富集模式，并建立了基于油饱和度指数、TOC和脆性指数等多参数的甜点定量评价方法及标准。针对甜点区部署了QY10-1-1水平井，其初期的折算产油量达103.5 t/d，预计可形成亿吨级增储新领域。勘探发现证实歧口凹陷的沙三段细粒岩段具备良好的页岩油勘探潜力。